One of the most horrifying experiences in life is not getting hot water when you are taking a shower or doing the dishes. Even if you have got a water heater, and that too a traditional gas tank one, chances are that it could run out of hot water. People who are disappointed with their experience with conventional heaters find refuge in the in-demand tankless water heaters. One of the popular names in the market is the German brand Stiebel Eltron. They have a broad range of tankless water heaters including Stiebel Eltron Tempra 36 Plus. The Stiebel Eltron Tempra 36 Plus falls into the “large water capacity” category of the tankless water heaters. On top of that, you get endless hot water to immediately and save money on bills while the tankless water heater does its job. Sounds amazing, right? Read on to know more about this heater:
Stiebel Eltron Tempra 36 Plus Review – Pros and Cons
Thus far, man has made no perfect machine. So, here are the standout attributes of the Stiebel Eltron Tempra 36 Plus, along with its flaws and imperfections.
Pros
- Highly energy-efficient
- Advanced Flow Technology provides uniform water temperature
- Microprocessor-controlled temperature with digital display makes setting it easier
- The water heater self-modulates to reduce costs
- Does not require venting
- Protection against scalding
- Huge output flow
Pros
- Costlier than other models in the market
- Does not work with 200-amp wires
- Subpar performance in colder areas
Stiebel Eltron Tempra 36 Plus Review – Features
The Stiebel Eltron Tempra 36 brings the following features to the table.
Massive and On-demand Hot Water Flow to Fulfill Your Needs
As mentioned earlier, the Stiebel Eltron Tempra 36 is of the highest capacity in the series, while the other models are Tempra 12, 15, 20, 24, and 29 Plus. The number represents the kW output of the respective model. As you can easily discern, the Tempra 36 Plus brings the maximum output and flow rate of hot water. The powerful tankless water heater can instantly provide a huge flow of 7 gallons per minute of hot water if the inlet water temperature is 70 degrees Fahrenheit. Hence, it is usable as a whole-house unit supporting several showers and sinks to run hot water simultaneously. However, the water flow rate drops in the colder regions. Therefore, it is commendable to make your purchase after consulting the average temperature map published by the manufacture. Nonetheless, even at temperatures as low as 40 degrees Fahrenheit, the tankless water heater supplies 3.8 gallons per minute, which suffices for two hot showers at the same time.
Patented Advanced Flow Technology for Consistent Temperature
Like the other models in the series, the Stiebel Eltron Tempra 36 Plus features the exclusive Advanced Flow Technology. What difference does it make, you ask? Well, the feature comes in handy if the water temperature fluctuates in your area fluctuates a lot. Such showers can be extremely discomforting to take. In that case, the water heater still provides a steady stream of hot water. So, if the chilly water supply is high, the Tempra 36 Plus reduces the flow to keep the water hot. Contrarily, it maintains a consistent heat if the water supply is under-capacity. Thus, you get hot water the whole time you open the tap or shower.
High Energy Efficiency thanks to Self-modulation
It is an undisputed fact that tankless water heaters immensely reduce electricity costs. The Tempra 36 further corroborates the statement as it boasts a 99 percent energy-efficiency. The tankless water heater saves a huge chunk of energy via self-modulation to heat the water only when it’s required. Hence, you end up saving a lot of money on electricity bills. The manufacturer claims that you can reduce the energy-associated costs of heating water by 15 to 20 percent. You can save that amount for the rainy days. Not only it saves money, but it also leaves you with a lot of space, thanks to the sleek design.
Desired Microprocessor-controlled Temperature and Digital Display Panel
The tankless water heater comes with a microprocessor-regulated control over the water temperature. Stiebel Eltron Tempra 36 Plus keeps itself from overheating with its anti-scalding feature. You can precisely set your desired temperature using the dial at the front. The temperature ranges from 86 to 140 degrees Fahrenheit. You can set the temperature and forget about it. The unit will make sure that you receive the adjusted temperature, recall the Advanced Flow Technology. Also, the Tempra 36 Plus makes things convenient with its digital display. It is needless to say that greater temperatures mean higher consumption, and thus, costly bills.
Warranty and Customer Support
Stiebel Eltron offers two warranties on the product. One is a 3-year warranty on the heating and electric parts, and the other is a 7-year warranty on any leakage on the heater. As long as you follow the provided instructions, you won’t void the warranty. Furthermore, the brand is easily approachable as you can directly contact different departments via phone, fax, and mail.
Final Verdict
